5
Installation Guide
AT-OME-EX-TX-WP-E
1. Connect a UHD/HD source to the
HDMI
port.
2. OPTIONAL: Connect a USB cable from the host computer to the
HOST
port.
3. OPTIONAL: Connect up to two USB devices, such as a speakerphone or keyboard to the
HUB
ports.
4. Connect a category cable, from the
HDBaseT OUT
port on the rear of the transmitter, to the
HDBaseT IN
port on the receiver.
5. OPTIONAL: Connect an RS-232 cable between a control system and the
RS-232
port on
the transmitter. Refer to
for more information.
Refer to the tables below for recommended cabling when using Altona products with HDBaseT.
The green bars indicate the signal quality when using each type of cable. Higher-quality signals
are represented by more bars.
Core
Shielding
CAT5e
CAT6
CAT6a
CAT7
Solid
UTP (unshielded)
N/A
STP (shielded)
*Atlona recommends TIA/EIA 568-B termination for optimal performance.
Cable*
Max. Distance @ 4K
Max. Distance @ 1080p
CAT5e
295 feet (90 meters)
330 feet (100 meters)
CAT6 / CAT6a / CAT7
330 feet (100 meters)
330 feet (100 meters)
IMPORTANT:
Stranded or patch cables are not recommended due to
performance issues.
Installation
Cable Recommendation Guidelines
Содержание Atlona Omega AT-OME-EX-TX-WP-E Series
Страница 13: ...13 Installation Guide AT OME EX TX WP E Notes ...
Страница 14: ...14 Installation Guide AT OME EX TX WP E Notes ...
Страница 15: ...15 Installation Guide AT OME EX TX WP E Notes ...