Panduit Atlona JunoX 451, Руководство по установке

Страница: 5 / 8

5
Installation Guide
AT-JUNO-451
Web GUI
The AT-JUNO-451 include a built-in web server which allows easy management and control of all
features. Follow the instructions below to access the web GUI.
1. Set the IP mode of the unit. Refer to the above instructions for more information.
2. Connect an Ethernet cable from the
LAN port on the AT-JUNO-451, to the Local Area
Network (LAN).
3. Use an IP scanner to determine the IP address of the AT-JUNO-451.
4. Launch a web browser and enter the IP address of the unit.
5. The AT-JUNO-451 Login page will be displayed.
6. Enter the following information on the Login page.
Login:
root
Password: Atlona
7. Click the Login button.
For easy configuration of Atlona devices, Velocity Device Manager is available from https://atlona.
com/velocity-device-manager/ for free. Two options can be used for installation: The free Linux-
based software download or the easy-to-install server hardware (AT-VGW-HW).
Once Velocity Device Manager has been set up:
1. Open a browser on the same network as Velocity Device Manager and go to the IP of
Velocity Device Manager. View the installation instructions on how to find the IP of the
software, if necessary.
2. Enter the login information on the Velocity Device Manager web page, then click the Login
button.
3. View the AT-JUNO-451 manual for routing and configuration information.
Velocity
™
Device Manager