4
Installation Guide
AT-JUNO-451
1. Connect a source to each of the four HDMI inputs (
INPUT 1
-
INPUT 4
).
2. Connect a display to the
HDMI OUT
port.
3. Connect an optical audio cable from the
OPTICAL
port to a sound bar or other audio output
device. Audio Return Channel (ARC) is supported. Refer to the User Manual for more
information.
4. Connect the included 4-pin captive screw block to the
RS-232
/
IR IN
port.
Refer to
RS-232 / IR Connector (page 3)
5. Connect an Ethernet cable from the
LAN
port to the Local Area Network (LAN).
Installation
IMPORTANT:
Stranded or patch cables are not recommended due to
performance issues.
6. Connect the included 5 V DC power supply to the
DC 5V
power receptacle.
7. Connect the power supply to an available electrical outlet.
POWER
J
UNO
X
1
2
3
4
INPUT
INPUT
FW
TM
1
2
3
4
HDMI IN
HDMI OUT
OPTICAL
AT-JUNO-451
RS-232 IR IN
LAN
DC 5V
TX
S
RX
1
2
3
4
5
6
IP Configuration
By default, the AT-JUNO-451 is set to DHCP mode, allowing a DHCP server (if present) to assign
the unit an IP address.
1. Make sure the unit is powered.
2. Press and hold the
INPUT
button for approximately 10 seconds.
3. Release the button once the
POWER
button begin to flash. The number of flashes will
indicate the currently selected IP mode:
POWER button flashes
Description
Two
Static IP mode
IP address:
192.168.1.254
Subnet mask:
255.255.0.0
Gateway:
192.168.1.1
Four
DHCP mode
Содержание Atlona JunoX 451
Страница 7: ...7 Installation Guide AT JUNO 451 Notes ...
