Panduit ATLONA AT-UHD-SW-510W-KIT, Руководство по установке

Страница: 3 / 16

3
Installation Guide
AT-UHD-SW-510W
1 AUDIO IN
Connect a 3.5 mm mini-stereo cable from an analog audio source to this connector.
2 AUDIO OUT
Use the included captive screw connector to connect a balanced audio device.
3 USB
Connect the included Wi-Fi antenna to these ports. The AUX port is reserved. Refer to
Installation on page 9 for more information.
4 RELAY
Connect one of the included 3-pin captive screw connectors to this port to control screens,
drapes, lights, or other devices.
5 TRIGGER I/O
Connect voltage-controlled device to this port. A 4-pin captive screw connector is required.
6 RS-232
Use the included captive screw connector to connect an RS-232 controller or automation
system.
7 USB-C
Connect a USB-C cable from this port to a USB-C source.
8 DP IN
Connect a DisplayPort device to this port.
9 HDMI IN
Connect an HDMI cable from each of these ports to a UHD/HD source.
10 HDMI OUT
Connect an HDMI cable from this port
to an HD/UHD display.
11 HDBaseT OUT
Connect to a locally powered HDBaseT receiver such as the AT-UHD-EX-100CE-RX-PSE.
12 LAN
Connect an Ethernet cable from this port to the network.
13 DC 24V
Connect the included power supply to this power receptacle.
Panel Descriptions
LAN DC 24V HDBaseT OUT HDMI OUT HDMI IN DP IN USB-C IN
2 3 4 1
RELAY RS-232 TRIGGER I/O
MIRACAST WiFi AUX
AUDIO
OUT
L R IN
USB
+
C1 COM C2
RX P TX
+ +
US B US B US B
1 2 3 4 5 6
7 8 9 10 11 12 13
Rear