Panduit Atlona AT-UHD-SW-5000ED Скачать руководство пользователя страница 47

Страница: 47 / 62

AT-UHD-SW-5000ED

Configuration and Management Interfaces

CEC Control

Click the

and

off

buttons to test power-on and power-off CEC commands, respectively.

Display Auto Power On

Set this toggle to

ENABLED

to allow the AT-UHD-SW-5000ED to send the power-on command to the display when

an A/V signal is detected. When the AV signal is no longer present, the AT-UHD-SW-5000ED will send the power-off

command to the display. If this feature is not desired, then set to

DISABLED

. This feature is disabled by default.

Display Auto Power Off

Set this toggle to

ENABLED

to allow the AT-UHD-SW-5000ED to send the power-off command to the display when

an A/V signal is detected. If this feature is not desired, then set to

DISABLED

. This feature is disabled by default.

Power Button Lock

Set this toggle to

ENABLED

to prevent the AT-UHD-SW-5000ED from being powered-off, if the POWER button is

accidentally pressed.

Lamp cool down timer

Sets the cool-down interval, in seconds, before the projector is powered-off. During this time interval, the projector

will not accept any “power on” or “power off” commands until the last “power off” command has been processed

and the projector lamp has completed the cool-down cycle. Available values are 15 seconds to 15 minutes. The

default setting is 10 seconds.

Auto power off timer

Sets the time interval before the command to power-off the display is sent, when an A/V signal is no longer present.

The default value is 15 seconds. Available values are 15 seconds to 15 minutes.

Display Warm-Up Timer

Click this drop-down list to select the display warm-up time interval. Available values are 10 to 300 seconds.

The default value is 10 seconds.

Control Type

Click this drop-down to select the control type. Available settings are

CEC*

, and

RS-232

. When this drop-down

list is set to

CEC

, the

RS-232/IP Commands

window group will be hidden.

* Consumer Electronics Control (CEC): Atlona has confirmed proper CEC functionality with several current mod

els of Samsung, Panasonic, and Sony displays. However, it is not guaranteed that CEC will work with all displays.

Many manufacturers do not support the CEC “off” command, and older displays use proprietary commands. Atlona

only supports displays that use the CEC command structure defined in HDMI 1.2a. It is recommended that dealers

request an evaluation product from Atlona, before designing a system using the CEC protocol. If this is not possible,

then other control methods will need to be considered, in order to control displays using Atlona products.

Setting

Description

DispSW AVon

Display switches on/off, source audio/video signal always on.

DispSW AVSW

Display switches on/off, source audio/video signal switches on/off.

AV SW

Display is always on, source audio/video signal switches on/off

Always ON

Both source and display are always on.

Display Mode

Click this drop-down list to select the power mode for the source / display.

Содержание Atlona AT-UHD-SW-5000ED































































Результаты поиска

Содержание Atlona AT-UHD-SW-5000ED

Отзывы:

Бренды по названию

Популярные бренды

Panduit Atlona AT-UHD-SW-5000ED, Руководство пользователя

Результаты поиска

Содержание Atlona AT-UHD-SW-5000ED

Отзывы:

Бренды по названию

Популярные бренды