AT-UHD-SW-5000ED
41
Configuration and Management Interfaces
The
Settings
page is divided into three sections:
Video
,
Audio
, and
HDCP
. The
Video
section provides controls for
switching modes and input selection. The
Audio
section provides options to control the output audio volume and
de-embedding. The
HDCP
section controls whether or not HDCP content is allowed to pass.
Settings Page
Auto Switch
Click this drop-down list to set auto-switching to
on
or
off
. The default settings is
off
. When set to on, the
AT-UHD-SW-5000ED will automatically switch to the
last-connected port. Refer to
.
Factory Default
Click the
Reset
button to reset the AT-UHD-SW-5000ED
to factory-default settings. Refer to
for more information.
Source
Click this drop-down list to select the desired input.
Available inputs are
Input 1
through
Input 5
.
Volume
Click and drag this slider to adjust the output volume.
Output volume is measured in decibels (dB) and ranges
from -80 to +15 dB. The default setting is 0 dB.
HDMI Audio Mute
Click this drop-down list to control HDMI audio output
muting. If set to
on
, then HDMI audio output will be
muted.
HDBaseT Audio Mute
Click this drop-down list to control HDBaseT audio
output muting. If set to
on
, then HDBaseT audio output
will be muted.
L/R Audio Mute
Click this drop-down list to control analog audio output
muting. If set to
on
, then the analog audio output will be
muted.
Factory Default
Click the
Factory Default
button to reset the current
page to factory-default settings. Note that clicking this
button
does not
reset the AT-UHD-SW-5000ED to factory
settings.
