AT-UHD-CLSO-840
59
The Web GUI
Network page
DHCP
Click ON to set the matrix to DHCP mode.
If a
DHCP
server is not found within 15 seconds, then the unit will
default to the static IP address of 192.168.0.150.
Refer to
for more
information on setting the IP mode. When
Mode
is set
to
DHCP
, the
IP Address
,
Subnet
, and
Gateway
fields
will automatically be populated. Click
OFF
to set the
matrix to static IP mode.
IP Address
Enter the IP address of the AT-UHD-CLSO-840 in this
field. This field will only be available if
DHCP
is set to
OFF
. The default IP address is 192.168.0.150.
Subnet
Enter the subnet mask in this field. This field will only be
available if
DHCP
is set to
OFF
.
Gateway
Enter the gateway (router) address in this field. This field
will only be available if
DHCP
is set to
OFF
.
Telnet Port
Enter the Telnet listening port in this field.
HTTP Port
Enter the HTTP listening port in this field.
IP Timeout
Enter the timeout interval, in seconds, before the Telnet
connection is automatically terminated after no activity.
Range: 1 to 3600 (seconds).
Hostname
Enter the hostname of the matrix in this field. This name
is used to identify the matrix on a network.
SDDP
Simple Device Discovery Protocol. SDDP is a discovery
(“IP scan”) protocol authored by Control4® to provide
easy integration of the AT-UHD-CLSO-840 with Control4
devices on a network. SDDP functions similar to the
UPnP (Universal Plug and Play) protocol. Click this
button to invoke SDDP.
Telnet Login Mode
Click
ON
to prompt for login credentials at the start of
a Telnet session. Use the same credentials as the web
GUI. If set to
OFF
, then no authentication is offered.
Save
Click this button to commit all changes.
Cancel
Click to abort changes.
