AT-HDVS-210H-TX-WP
24
CEC Command
Click the ON or OFF button to turn the display on or off using CEC.
The Web GUI
Display Auto Power On
Set this value to
ENABLE
to send the command to power-on the display when an A/V signal is detected. Otherwise,
set to
DISABLE
to turn this feature off.
Display Auto Power Off
Set this value to
ENABLE
to send the command to power-off the display when an A/V signal is no longer present.
Otherwise, set to
DISABLE
to turn this feature off.
Lamp cool down timer (Sec.)
Sets the cool-down interval, in seconds, before the projector can be powered-off. During this time interval, the
projector will not accept any “power on” or “power off” commands until the last “power off” command has been
processed and the projector lamp has completed the cool-down cycle. Range: 0 to 300.
Consumer Electronics Control (CEC): Atlona has confirmed proper CEC functionality with several current models of
Samsung, Panasonic, and Sony displays. However, it is not guaranteed that CEC will work with all displays. Many
manufacturers do not support the CEC “off” command, and older displays use proprietary commands. Atlona only
supports displays that use the CEC command structure defined in HDMI 1.2a. It is recommended that dealers
request an evaluation product from Atlona, before designing a system using the CEC protocol. If this is not possible,
then other control methods will need to be considered, in order to control displays using Atlona products.
Display page
