AT-CAP-SP100
7
Panel
Description
1 Volume / Power Indicators
While the unit is on, the indicators will display the
volume level when the volume buttons are pressed.
Quickly press the power button to have the LEDs
display the power level. LEDs will display green for
power.
2 Volume Buttons
Use the plus and minus buttons to increase or
decrease the volume level.
3
Answer/Hang up Button
Select this button to accept incoming calls. When in
a call press to hang up the call.
4
Audio In/Out Port
Connect the included AUX cable from this port to a
PC or a second unit for audio chaining (using AT-
CAP-SP100-CBL).
5 5V 2A USB-C Port
Connect the included USB-C to USB A cable from
this port to either a PC or USB power strip. This port
will pass through audio and also be used for power.
6
Bluetooth Button
Press and hold the button for 2 seconds to turn
Bluetooth on and off. When Bluetooth is connected
(LED will be blue), hold the button until it is
disconnected.
7
MIC Mute/Unmute
Press this button to mute and unmute the
microphone. The LED will turn red when muted.
8 Power Button
Press and hold the button to turn the unit on and off.
The unit will beep when turning on or off. This button
can also be quickly pressed to display the power
level.
NOTE:
Some apps or devices may require the
button to be held for up to 5 seconds to hang up.
1
4 5
2
6
7
8
2
3
