AT-CAP-SP100
11
Installation
Power
Compatibility
Connection Instructions
1.
Press the power button until the unit turns on. A beep will play to indicate the power has turned on.
2.
Connect the unit to the audio conference device (e.g. PC).
a.
Bluetooth - Bluetooth will start flashing blue when powered on to connect. If connected through USB-C
to a computer, the bluetooth button should be pressed and held for 5 seconds to enable pairing. Go to the
conference device and select the AT-CAP-SP100 from the Bluetooth device list.
b. AUX - Connect the AT-CAP-SP100 to the audio conference device using the included AUX cable. The
device should auto detect the speakerphone.
c.
USB - Connect the AT-CAP-SP100 to the audio conference device using the included USB-C to USB A
cable. The device should auto detect the unit.
3.
Select the AT-CAP-SP100 as the default audio device for input and playback.
The AT-CAP-SP100 will come with a small power charge. The unit will need to be charged fully before using.
a.
If using the unit with the USB-C to USB A cable, it will charge while in use and nothing additional will be
needed.
b. If using the unit with the AUX cable or over Bluetooth, the device can be powered through the included
USB-C to USB A cable or using Qi wireless charging.
Qi Charging
There are many types of Qi chargers. To work with the AT-CAP-SP100, it must provide 7.5W for power. Atlona
has tested some chargers to ensure compatibility. See the table below for tested Qi chargers:
AT-CAP-SP100 is compatible with any device that uses Bluetooth, USB, or AUX inputs, however, powering
capabilities differ per device. The below tables will list the Atlona products that can power the AT-CAP-SP100 without
additional power being needed and the ones that will need an additional USB hub or Qi charger to power the AT-
CAP-SP100.
Compatible Chargers
Anker PowerWave II Pad
Apple MagSafe Charger
Anker 313 Wireless Charger Pad
Logitech Power Pad
(950-000010)
Atlona products that do NOT require additional power sources
AT-OME-MS42
AT-OME-EX-RX
AT-OME-MS52W
(front USB ports only)
AT-OME-EX-TX
AT-OME-SR21
AT-OME-EX-KIT
AT-OME-MH21
AT-OME-EX-KIT-LT
AT-OME-PS62
Atlona products that require additional power sources
AT-OME-EX-TX-WP-LT
AT-USB-EX100-TX
AT-OMN-324
AT-OME-EX-TX-WP
AT-OME-EX-TX-WPC
AT-OME-EX-TX-WP-E
AT-OME-SW21-TX-WPC
NOTE:
Certain devices will send data over USB to the AT-CAP-SP100 when powered down, this will
cause the unit to power back on.
NOTE:
Mute status sync on Microsoft Teams will only display when the AT-CAP-SP100 is connected
via USB.
