Pandora Smart Moto страница 52 Скачать руководство пользователя

Страница: 52 / 56

PANDORA SMAR T MOTO PLUS

WARRANTY OBLIGATIONS

Manufacturer guarantees correct operation of the service-security system if exploitation, installation,

storage and transportation conditions described in this manual were met.

The system should only be used according to installation scheme and user manuals.

The system is meant to be installed by the professional car electronics installers. The installer should

fill in installation certificate that is included in this manual.

Parts malfunctioning during warranty period on the fault of the manufacturer should be repaired

or replaced by the installation center of the manufacturer or by certified service center. List of certified

service centers can be found on pandorainfo.com

The user loses the right for warranty services in the following cases:

• when warranty period expires;

• if exploitation, installation, storage or transportation conditions were not met;

• if there is mechanical damage of the external parts of the system after it is sold.

This includes: fire damage, consequential damage in case of car accident, aggressive liquids and

water seeping damage, damage caused by improper use;

• if the damage was caused with incorrect settings and parameter adjustment;

• if system devices are replaced with any devices that are not recommended by the manufacturer;

• if manufacturer sealing is broken;

• if there is no properly filled warranty card and installation certificate.

Warranty period is 3 years since the moment of purchase, but no more than 3.5 (three and a half)

years since the moment of production. This warranty does not include batteries of the remotes, as they

have their own service lifetime.

Maintenances and repairs of the system with expired warranty period are carried out at the expense

of the user on a separate contract between the user and the installer/service center.

RECOMMEND

THAT

YOU

ASK

INSTALLER

FILL

OUT

THE

INSTALLATION

CERTIFICATE

AND

THE

WARRANTY

CARD

. T

HESE

DOCUMENTS

MAY

REQUIRED

FOR

CONTACTING

THE

CUSTOMER

SUPPORT

Содержание Smart Moto

























































Результаты поиска

Содержание Smart Moto

Отзывы:

Похожие инструкции для Smart Moto

Бренды по названию

Популярные бренды

Pandora Smart Moto, Руководство пользователя

Результаты поиска

Содержание Smart Moto

Отзывы:

Похожие инструкции для Smart Moto

Бренды по названию

Популярные бренды