31
USER MANUAL
performs a search for immobilizer tags in radio zone. If no radio tags are detected when
the ignition is switched on, the system will block the engine with all radio relays that are
programmed into the system. Engine blocking will occur immediately or at the time a
motion sensor detects movement, it depends on the system settings.
Anti-Hi-Jack mode
This mode is disabled by default. Use the Pandora Alarm Studio application to enable this
mode. The Anti-hi-jack mode helps to prevent aggressive seizure of the car using delayed
engine blocking on door opening. Every time on opening/closing a door when the
ignition is switched on, immobilizer requests a response from a radio tag using a unique
algorithm. After a door was opened while the engine is running, if the system cannot
detect a radio tag, the engine will be stopped after 1 minute (general safety requirement).
A siren will play ‘ENGINE BLOCKING WARNING’ ringtone before blocking. The engine will be
blocked immediately or at the time the car starts moving, it depends on system settings.
Anti-Hi-Jack-2 mode
This mode is disabled by default. Use the Pandora Alarm Studio application to enable
this mode. The Anti-Hi-Jack-2 mode helps to prevent aggressive seizure of the car
using delayed engine blocking on radio tag disappearance. The system constantly
requests a response from a tag using a unique algorithm when the ignition is being
switched on. If the system cannot detect a radio tag, the engine will be stopped after
1 minute (general safety requirement for car movement). A siren will play ‘ENGINE
BLOCKING WARNING’ ringtone before blocking. When warning signals end, the system
WARNING! IF THE SYSTEM DOES NOT RECOGNIZE A RADIO TAG, THE BEEPER WILL
EMIT 5 SOUND SIGNALS WHEN THE IGNITION IS TURNED ON, THIS WILL REPEAT 5 TIMES.
CHECK A RADIO TAG BATTERY, MOVE A TAG (IT GOES TO THE SLEEP MODE WHEN IT
REMAINS MOTIONLESS AND THE IGNITION IS SWITCHED OF. A BUILT-IN ACCELEROMETER
HAVE TO RECOGNIZE MOVEMENT TO ACTIVATE A TAG).
