25
USER MANUAL
AUTOMATIC ENGINE START SETTINGS
This menu allows configuring the automatic engine start and stop settings. A
synchronized real-time clock in the remote control and the base unit and other
autonomous system settings allow to implement set of conditions of engine start and
operation regardless of whether the remote control is in the radio coverage zone or not.
NOTE! If you have not saved new settings, remote and automatic engine start settings
will remain the same as before.
Engine start via temperature is available only if temperature sensor is connected. The
sensor availability depends on the system set.
•
«ENABLE»
- this submenu switches on/off all automatic engine starts.
•
«TIMER»
- this submenu allows starting an engine every day at the scheduled time.
•
«START TEMP»
- this submenu allows starting an engine automatically when the
engine temperature is low.
•
«WORK TIME»
- This submenu determines the maximum engine operation time for
automatic and remote starts.
•
«PERIODICALLY»
- this submenu allows starting engine periodically with a
configured time interval.
•
«STOP TEMP»
- this submenu determines the engine stop temperature.
CONTROL OVER AN ENGINE PREHEATER
This menu allows switching on/off an engine pre-heater.
Note! To quickly switch on an engine pre-heater, press and hold button 5 for 3 seconds.
To quickly switch off an engine pre-heater, press and hold button 5 for 2 seconds.
SETTINGS AND ADJUSTMENT OF THE SENSORS
This menu allows controlling and adjusting sensors (shock/motion/
tilt) sensitivity. SHOCK and additional EXTERNAL sensors have separate sensitivity zones.
Alarm zone triggers when there are considerable impact on a sensor. Warning zone
triggers when there are minor impact on a sensor (the sensitivity of the warning zone
AUTOSTART
HEATER
SENSORS
