7
6
U S E R M A N U A L
P A N D O R A D X L 1 9 2 0 L / 1 9 3 0 L C A R S E R V I C E - S E C U R I T Y S Y S T E M
You can also check the number of recorded tags and registered mobile device by taking off and
putting back on battery terminal. The system will emit short sound signals from a siren with less than
1 sec. interval. The number of the signals equals to the number of recorded tags. After a pause of 2
seconds the system signal will indicate registered mobile device.
CONTROL OVER THE SYSTEM
Arming/disarming using radio tag
To arm/disarm the system, RF tag should be in radio coverage area.
The system produces a protected (AES-128 encryption) interactive
high-speed exchange of authorization codes in the frequency
range 2,4 GHz on one of 125 channels. To arm the system when the
ignition is switched off, shortly press the tag button. The system
will confirm the command receiving with 1 short sound signal and
1 flash of turn indicators. To disarm the system, shortly press the
tag button. The system will confirm the command receiving with
2 short sound signals and 2 flashes of turn indicators. Each button
press will be confirmed with
LED
indicator flash of the tag that
indicates the battery is functioning correctly. If
LED
indicator does
not flash or constantly lights, the tag battery should be replaced
(see “Replacing immobilizer tag battery“ section).
Arming/disarming in Hands Free mode
The system allows for programmable Hands Free arming and disarming. To arm the system, when the
engine is not running, move with the remote tag away from the car at a distance greater than the
regular radio coverage (10 meters for 2,4 GHz) – the system will be armed automatically. To disarm the
system, move toward the car with remote tag. Enabling/disabling this function can be performed with
a phone (see “Control over system via a phone“ section).
Arming/disarming in «Slave» mode
In this mode it is possible to monitor the status of original security system of the car via CAN-bus or
by analog inputs. When arming and disarming original security system, Pandora will be armed and
disarmed respectively. The presence of a tag in the radio zone is not required, but at the beginning of
motion if the tag is not detected by the system, the engine will be blocked.
Siren sounds and turn light signals
Signal name
Signal description
Alarm mode, PANIC mode
Incessant sound and light signals for 30 sec
Arming
1 sound and 1 light signals
Disarming
2 sound and 2 light signals
“Sensors triggered“ signal when
disarming
4 sound and 4 light signals
“Sensor malfunction“ signal when arming
4 sound and 4 light signals
Sensor warning level triggered
3 sound signals
Car search
5 sound and 5 light signals
Meaning of indicator LED colors
Indicator status
Meaning
Short red flashes
The system is armed
Lit red
The system is preparing for automatic arming
Orange flash
Confirms VALET button press
Green flashes
Confirms a number of recorded remotes (when switching on ignition)
Red flash
Confirms a recorded mobile device (when switching on ignition)
Red and green flashes
PIN-code confirmed
Faded
The system is disarmed
Checking the number of registered radio tags/mobile devices
The number of recorded tags and registered mobile device can be checked by the number of green
and red flashes of LED indicator. Number of registered tags can be checked every time the ignition is
switched on when the system is disarmed. Number of green
LED
flashes will indicate the number of
recorded tags, following red flash will indicate registered mobile device.
LED indicator
Controlling
button
