Pandora DXL 1100L, Руководство пользователя

Страница: 20 / 25

39 38
USER MANUAL PANDORA DXL 1100L SERVICE-SECURITY
SYSTEM CONFIGURATION AND PROGRAMMING
ENTERING THE PROGRAMMING MENU
To change the system settings using a computer or
VALET
button, the system should
be in programming mode. Enter programming mode by entering «Service PIN-code»
(factory preset is 1-1-1-1). PIN-code should be entered using external VALET button.
The input is indicated by flashes of the external
LED
indicator. You can enter the code
only if the base unit is powered form USB socket or from external power supply, the
ignition is switched off , the system is disarmed and the system is not in maintenance
mode.
Entering the «Service PIN-code»:
• Enter the first digit of the code using
VALET
button. Press the button a number
of times, equal to the first digit. Pauses between presses should not exceed 1 second.
Each pressing will be confirmed with orange LED indicator flash. Pause for more than
1 second and red
LED
indicator flash confirm the input of the first digit. Then you can
enter the next digit.
• Enter the second digit of the code using VALET button. Press the button a
number of times, equal to the second digit. Pauses between presses should not
exceed 1 second. Each pressing will be confirmed with orange LED indicator flash.
Pause for more than 1 second and red LED indicator flash confirm the input of the
second digit. Then you can enter the next digit.
• Enter the third digit of the code using VALET button. Press the button a number
of times, equal to the third digit. Pauses between presses should not exceed 1 second.
Each pressing will be confirmed with orange
LED
indicator flash. Pause for more than
1 second and red LED indicator flash confirm the input of the third digit. Then you can
enter the next digit.
• Enter the fourth digit of the code using
VALET
button. Press the button a number
of times, equal to the fourth digit. Pauses between presses should not exceed 1
second. Each pressing will be confirmed with orange
LED
indicator flash. The correct
S Y S T E M C O N F I G U R A T I O N A N D P R O G R A M M I N G S Y S T E M C O N F I G U R A T I O N A N D P R O G R A M M I N G
input will be confirmed with the series of green and red flashes of the LED indicator
and the system will enter programming mode. If the input was incorrect, it will
be indicated with a long red flash of the LED indicator and the system will stay in
previous state. New input can be attempted after 5 seconds.
Status indicator lights during PIN-code entering:
«LED» indicator lights Description
Short orange flash Confirmation of VALET button pressing
Short red flash Confirmation of entering a PIN-code digit
Red and green flashes Entered PIN-code is correct
Long red flash Entered PIN-code is incorrect
Exit programming mode:
To exit programming mode turn on the ignition or press and hold VALET button
for 10 second (the siren will emit a sound signal) or turn off power of the base unit.
The system will reboot programmatically (all changes will be saved) after exiting
programming mode.
All ways to exit the programming menu are accompanied by sound signals of
the siren and light signals of the LED indicator. The signals indicate the number of
recorded control devices.
Indication of recorded control devices:
«LED» indicator lights Description
Short orange lights The number of recorded remotes control