Pandora DXL 1090L, Руководство пользователя

Страница: 9 / 35

17 16
USER MANUAL PANDORA DXL 1090L SERVICE-SECURITY SYSTEM
R E M O T E C O N T R O L
To enable/disable a radio tag, enter level 15 (the system should be in programming
mode). Enter the «Secret PIN-code» to disable radio tag or press
VALET
button once
to enable radio tag.
Enter the «Service PIN-code» to enter the programming mode (factory preset of
the «Service PIN-code» is «1-1-1-1»). You can enter the code only if the base unit is
powered, the ignition is switched off, the system is disarmed and the maintenance
mode is switched off. If there is no «Service PIN-code», you can enter programming
mode using the «Secret PIN-code» written on the owner’s card. After entering
programming mode, press VALET button 15 times. Green color of LED indicator
means a radio tag is switched on, red color means a radio tag is switched off.
Disabling a radio tag:
LED
indicator will light green after entering the programming level. The system will
wait for entering the «Secret PIN-code». Enter the «Secret PIN-code» that is written on
the owner’s plastic card. The system will confirm disabling of the radio tag with two
sound signals of the siren and a long red
LED
flash. After that the system will return to
the programming menu. If the PIN-code is not entered within 10 seconds or the input
is incorrect, a siren will sound one signal, LED will produce the series of red and green
flashes and the system will return to the programming menu.
Enabling a radio tag:
LED
indicator will light red after entering the programming level. The system will
wait for action. Press
VALET
button once to enable radio tag. The system will confirm
enabling with one short sound signal of a siren and a green LED light. After that the
system will return to the programming menu.
R E M O T E C O N T R O L
3. Enter the third digit of the code using VALET button. Press the button a number
of times, equals to the third digit. Pauses between presses should not exceed 1
second. Each pressing will be confirmed with orange LED indicator flash. Pause for
more than 1 second and red LED indicator flash confirm the input of the third digit.
Then you can enter the next digit
4. Enter the fourth digit of the code using
VALET
button. Press the button a number
of times, equals to the fourth digit. Pauses between presses should not exceed
1 second. Each pressing will be confirmed with orange LED indicator flash. After
correct enter of the fourth digit the system will enter programming mode. The
correct input will be confirmed with the series of green and red flashes of the
LED indicator. If the input was incorrect, it will be indicated with a long red flash
of the
LED
indicator and the system will stay in previous state. New input can be
attempted after 5 seconds.
After correct input of PIN-code the system will enter programming mode if it was
disarmed and the ignition was switched off.
For emergency arming when the engine is stopped, press and hold VALET button for
3 seconds. The system will be armed in 30 seconds.
ENABLING/DISABLING AN IMMOBILIZER RADIO TAG
Write down or remember the «Service PIN-code»
WARNING! It is highly recommended to change factory preset of the
«Service PIN-code» for improving security of the system.