Pando ORPAN E-251, Руководство по установке

Страница: 38 / 41

V2300—6 metres V2100—4 metres
V2500—6 metres V1900—15 metres
IMPORTANT: EXTERNAL MOTOR IN FALSE CEILING
The dimensions of the external motor must be taken into account, particulary if it is to be located at
the same level as the false ceiling of the extractor hood. (See dimensions an appendix).
SUPPLIED ACCESSORIES : (these accessories are supplied with the hood):
4 threaded rods of 8mm. 8 washers Ø 24mm.
4 washers Ø60mm.
4 wingnuts of 8mm.
4 wingnuts 8mm. 4 metalic plugs of 8mm.
1 Remote control
1 installation guide
1 installation guide.
1 adapter rectangular of 100x260mm for to pipe the conduit by the side;
1* adapter converter from rectangular 100x260mm to circular Ø200mm for to pipe the conduit by
the side.
1 smoke ductwork SEC ( 5m), smoke ductwork of Ø200mm from interior and Ø270 mm from exte-
rior.
(* please note, if you use the adaptor for to pipe to the side air outlet, the height of the hood increase
from 200 to 300 mm, because the adaptor stands out by the upper side of the hood).
INOXPAN S.L. EN
the extractor hood and motor
Once we know what type of motor we need, we must then consider the maximum distance between
fore be given to where the motor will be located, since it must be easily accessible.
This model is only supplied with External, Ceiling and Wall mounted Motors. Thought must there-
is a risk of fumes escaping at the sides. .
The width of the hood must always be greater than that of the cooking area. If it is narrower there
2,40 m.
The maximum distance between the FALSE CEILING and the FLOOR should be no more than
ensure a continious flow of air.
For optional operation of the model E-251 ventilation grilles must be installed at ground level to
areas of any kind.
The ceiling where the extractor hood is to be installed must be completely flat, with no uneeven
ractor hood where the conduit is connected
Before the false ceiling is closed, some form of access panel must be installed on the side of the ext
Extraction conduit pipe connection to the extractor hood.
This model has Internal LED courtesy lighting.
POINTS TO BE CONSIDERED:
38
Do not cover the lighting , when you install the false ceiling.(Page 36)