1
‐
Protect
the
cooktop.
Raise
the
upper
section
of
the
structure
to
the
ceiling
and
mark
the
holes.
Drill
the
holes
and
fit
plugs.
2
‐
Screw
the
upper
section
to
the
ceiling,
with
the
extraction
tube
and
mains
cables
inside.
3
‐
Raise
the
hood
assembly
and
lower
structure
to
the
level
of
the
upper
structure.
4
‐
Slide
the
structure
along
the
guides
until
the
hood
is
65
cm
above
the
cooktop.
5
‐
Secure
the
guides
with
the
4
screws
supplied.
6
‐
Connect
the
extraction
tube
and
mains
cable.
Adjustment
screw
Adjustment
screw
(Note:
Make
sure
the
power
supply
to
the
cables
is
disconnected
when
making
the
connection)
8
‐
Fit
the
upper
tube
which
is
composed
of
2
parts
and
screw
it
to
the
structure
with
the
screws
supplied.
TECHNICAL
DIVISION
ASSEMBLY
MANUAL
I
‐
1001
NOTE: THE HOOD MUST BE CENTRED OVER THE COOKING AREA
