Pandigital PAN1200DWPTFR, Руководство пользователя

Страница: 36 / 62

36
4. Use the left/right arrows to scroll through the fields, and the
up/down arrows to change the field values.
5. Touch or press ENTER to enable the Weekdays and/or
Weekends Schedule buttons.
6. Select
Done
to save the settings.
Disable the Schedule
To disable the schedule, turn both
Enable Weekdays/Weekends
Schedule buttons OFF, and the entry fields will display OFF .
Run the Schedule
After the schedule times have been set
(per instructions on page 35)
,
you will use the
Run Schedule
function whenever you want the
schedule to take effect.
CAUTION
: After you select the
Run Schedule
function, any user
intervention will cancel the activation and the schedule
will not take effect until you select this function again to
re-activate.
At the start of a slideshow, touch
RUN SCHED
before the
menu times out.
While a slideshow is playing, or on the
CALENDAR/CLOCK screen, activate the PanTouch
interface and touch
RUN SCHED
.
At the start of a slideshow, press
ENTER
when the
RUN
SCHED
button is displayed on the screen
(approximately 10
seconds)
.
While a slideshow is playing, or on the
CALENDAR/CLOCK
screen, press
MENU
, and then select
RUN SCHED
.
A small timer clock will appear indicating the schedule is active, and
the DPF will go into stand-by mode according to the schedule.