P&E Microcomputer Systems Cyclone LC Series, Руководство пользователя

Страница: 89 / 149

User Manual For Cyclone LC Programmers 89
-firmwareupdate=[firmware update mode]
Set the firmware update mode to “auto”, “dontupdate”, “forceupdate”. The default mode is “auto.”
-help
Display a list of available commands.
The following command-line parameters require a Cyclone FX , or a Cyclone LC with the
ProCryption Security Activation License.
-listencryptionkeys
List Encryption Key Files that reside on Cyclone
-addencryptionkey=[file path]
Add ImageKey file to Cyclone. The file path is the path to the ImageKey.
-deleteencryptionkey=[object ID or display index]
Delete ImageKey File from Cyclone. Can be deleted by ID, or by display index number (-
listencryptionkeys returns a numbered list of ImageKeys; the display index corresponds to these
numbers).
8.3.3 Examples
The commands should be separated by a space. Every command starts with a “-” character,
arguments follow the “=” character.
8.3.3.1 Typical Usage
This example connects to a single Cyclone identified by its IP address 10.0.1.1 and executes its
first image. This is the most common usage of the Cyclone Control Utility.
This example connects to a single Cyclone enumerated on USB1 and executes its first image.
8.3.3.2 Controlling Multiple Cyclones
This example connects to three separate Cyclone units. Two units are connected via USB
(10.0.1.1 and 10.0.1.2) and the third is connected via Ethernet (10.0.1.3). The three Cyclone units
are configured to execute image #2.
CycloneControlConsole.exe –cyclone=10.0.1.1 –launchimage=1
CycloneControlConsole.exe –cyclone=USB1 –launchimage=1
CycloneControlConsole.exe –cyclone=USB1,10.0.1.2,10.0.1.3 –
launchimage=2