P
a
n
chromatic
Eumig P26
User Manual
7
www.Panchromatic.co.uk
claws are withdrawn and cannot be damaged. Now, press the gate
closed with the fingers and gently ease the unit forward and out,
without using any undue pressure.
The film gate, as well as the lens, the condenser and the reflector
should be cleaned with a very soft cloth or brush. For removing or
cleaning the lens, press away spring
3
(
Fig.A
), which will then allow to
easily remove the lens.
Oiling of the projector should be done regularly after projection of every
3000 ft. of film or so. Interior bearings are lubricated from the central
point
6
(
Fig.8
). (After removing the closing button) External points to be
lubricated are Indicated by red spots.
Cleaning and Oiling of the claw mechanism is easier, if the film gale is
removed. The little spring is pressed down on the spot marked by
number
9
(
Fig.A
) and the entire tens holder is pulled out until there is a
distinct stop. (In order to avoid spattering the film with oil use the
smallest amount possible.)
Service@
P
a
n
chromatic.co.uk
