Panasonic ZU-1870MA6T2, Технические характеристики

Страница: 11 / 11

9
12.2 At the use
(1) Be sure to use a card which conforms ISO standard.
Anti-magnetic of the applied card should be 2.4x10
4
A/m to 2.4x10
5
A/m (300 Öe to 3000 Öe) of ISO standard.
(2) Pulse width of the period “L” of /RCL is about 7.7µS for the card
conformable to ISO1 (210 BPI specification),and about 19µS in case
of ISO2(75 BPI specification).If sampling method other than falling
edge sampling(such as a method detecting ”L” of /RCL by means of
polling ) is used, please check with us since data may not be read
depending on polling frequency at the host side.
(3) Card operation speed should be within the specification range.
Forced stop or change of speed during the card operation may
cause a read error.
Appropriate speed to maintain stable operation is 30 cm/s to 60 cm/s.
(4) Store the card with caution to prevent dirt, scratch and distortion.
Especially no foreign matter shall be stuck on the magnetic stripe
surface. Use of such card may result in a read error.
(5) Insert a cleaning card and clean the head periodically to prevent
wearing of the magnetic head.
Head cleaning using the cleaning card should be performed about
once a week if the room is not dusty.
(6) Depends on installation environment (incorporation condition) or
operation condition, external noise or electrostatic and so on may
affect the machine, and which may cause an error or a wrong
operation. Check the level of noise resistance and electrostatic
resistance of your factory before using the card reader.
(7) Be careful not to splash the gasoline or light oil on the head cover
Rubber seal). There is possibility that the rubber seal spoil its water
proof performance due to expansion or transformation.
(8) Please avoid touch rubber seal directly. It is possible that the rubber
seal spoil its water proof performance due to transformation or split.