檢測提示燈亮起時
10
狀態提示燈
正面顯示部
門開啟提示燈
檢測提示燈
確認鹽粒提示燈
加水提示燈
運轉提示燈
電極復位指示燈閃爍或亮起時
●
閃爍
：
已經快到更換電極時間
，
閃爍約
1
個月後電極復位指示燈將會常亮
。
→
請更換電極組件
。
（第
22~23
頁）
●
常亮
：
無法運轉
。
清潔復位指示燈亮起時
＜
約
1
個月亮起
＞
→
請進行維護保養
。
對集塵過濾網
、
水盤
、
泵組件
、
防霉組件
、
除菌
過濾網組件進行維護保養（第
16~22
頁）後
，
安
裝到主機上
。
安裝後請按 約
3
秒鐘
。
●
如果在清潔復位指示燈的亮起時間之前進行
維護保養
，
也請按 約
3
秒鐘
。
門開啟提示燈亮起時
→
請確認數字顯示屏的異常碼
。
（第
27
頁）
→
提示前面板未關閉或未關閉好
，
此時產品將無法運轉
。
加水提示燈亮起時
→
提示水盤中少水或無水
，
此時產品將無法運轉
。
運轉提示燈亮起時
→
提示產品正在正常運轉
。
排水提示燈亮起時
→
提示排水水箱已滿水
，
請倒掉水並把排水水箱重新裝
入
，
否則產品將無法運轉
。
確認鹽粒提示燈亮起時
→
提示加入
1
粒鹽粒
，
加入後按下操作面板上的確認
鹽粒按鈕
，
否則產品將無法運轉
。
狀態提示燈
從中央往兩端亮起
：
運轉中
兩端同時閃爍
：
準備運轉中
中央閃爍
：
清潔運轉中
2
處交替閃爍
：
除菌過濾網乾燥運轉中
排水提示燈
各部件名稱
EACH PARTS IDENTIFICATION
Front display part
Error indicator
Status indicator
Status indicator
Lighting on from the center to both sides:
Normal operation is in progress.
Blinking alternately at two positions: Drying
operation of the sterilization filter is in progress.
Blinking at the center: Cleaning operation is
in progress.
Blinking on both ends at the same time:
Preparatory operation is in progress.
Please replace the electrode unit. (Page 22~23)
Steady on: The product does not work.
Please perform maintenance.
Please check the error code displayed
on the digital display. (Page 27)
There is little or no water in the tray, and the
product cannot operate at this time.
The front panel is open or not closed properly,
and the product cannot operate at this time.
After the maintenance, install the dust filter,
tray, pump assembly, anti-fungus assembly,
and sterilization filter assembly (Pages 16~22)
back to the main unit. After installation, press
and hold for about 3 seconds.
If you perform maintenance before the
cleaning reset indicator lights on, press and
hold for about 3 seconds as well.
Blinking: The electrode replacement time is approaching. The electrode reset indicator will
become steady on after blinking for about one month.
When the electrode reset indicator blinks or lights on
When the cleaning reset indicator
lights on <About once a month>
When the error indicator lights on
When the door open indicator lights on
When the water refill indicator lights on
When the drain indicator lights on
When the operation indicator lights on
The product is operating normally.
When the salt input confirm indicator lights on
One salt tablet should be added. After adding,
press the salt input confirm button on the
control panel; otherwise the product cannot
operate.
The drain tank is full of water. Please empty
the drain tank and install it back; otherwise
the product cannot operate.
Door open
indicator
Water refill
indicator
Salt input
confirm indicator
Drain
indicator
Operation indicator
