Panasonic YC-400TX, Руководство пользователя

Страница: 9 / 29

6
4. Rating
Item
Type
YC-400TX
Rated Input Voltage V 415
Allowable fluctuation V 415
±
10%
No. of Phase 3
Rated Frequency Hz 50/60
Rated input
TIG
KVA
14.5
STICK 21.4
Rated input
TIG
KW
12.4
STICK 17
Rated No-Load Voltage V 73
Output current A 4~400
Initial current A 4~400
Pulse current A 4~400
Crater current A 4~400
Rated output voltage
TIG V 26
STICK V 36
Rated Duty Cycle % 60
Pre-flow s 0.3
Post-flow s 2~20
Up slope timer s 0.1~5
Down slope timer s 0.2~10
Pulse frequency
MIDDLE Hz 10~500
LOW Hz 0.5~30
Pulse Width % 5~95
Crater control process Three mode(ON,OFF,REPEAT)
Outside dimension mm 327(W)
×
620(D)
×
620 (H)
Weight kg 43
N.B.
1)Where upslope and downslope time are to be 0 second, use the slope “ON”
／
“OFF” Switch mounted
in PC board TSMP445
□
.(The switch is set to “ON” position at shipment.)
2)
Ensure correct application of the voltage reducing device by the “ON”/”OFF”switch in PC board
TSMP445
□
*
＂
OFF
＂
:Voltage reducing device is not activated.
*
＂
ON
＂
:Voltage reducing device is activated.
(The switch is set to
＂
ON
＂
position at shipment.)