Basic Operations
23
Shift mode change
In text entry mode, you can change mode by pressing and holding
C
.
Text entry mode change
In text entry mode, to switch T9 mode on/off, press
!
.
Auto capital change
Auto capital affects Abc and T9Abc
.
When the entry mode is changed to Abc or T9Abc, the first character is input as upper
case and subsequent letters as lower case.
When one of the following characters [. (Period) or ! or ? ] is input before a space, the
next character is input as upper case.
T9
Text Input:
Using this mode of text entry dramatically reduces the required number of key presses.
Press a key once for any letter you require on that key. The desired letter may not be
displayed. Continue pressing other keys until the end of a word is reached, then check
that the word has been typed correctly before continuing on to the next word. If the
combination of letters typed has produced a word which is not the one you require,
press
A
repeatedly until the correct word is displayed. Then continue to the next
word.
Example of Text entry in T9 Mode
To type a new message, follow these steps:
1. At the beginning of a new message, press and hold
@
(Clear) to delete previous
text, if necessary
2. Press
C
to change letter case, if necessary
3. Press
% % ( (
. “Call” is displayed
Note that the displayed words change as you type. Always type to the end of the word
before editing.
T9
languages can be selected from T9 Input – see “T9
Input“ on page 35.
If the word you require is not in the internal dictionary, it should be entered using the
Multi tap mode.
Multi tap
Tegic
abc
Æ
Abc
Æ
ABC
Æ
123
T9abc
Æ
T9Abc
Æ
T9ABC
Æ
123