Panasonic WX-SA250P, Руководство по эксплуатации

Страница: 19 / 56

19
ENGLISH
⿟ Use the included cable tie to fix the cable onto the cable tie hook and partially pass
it through the routing groove on the rear of the antenna to avoid any excessive
pulling force on the cable during installation.
Cable tie
(included)
Cable tie hook
5
Install the antenna
A
Attach the antenna to the hooks on the fixing bracket. (Four places)
Grooves Hooks
B
Open the screw cover on the side of the antenna
and use the included mounting screw (M3x8 mm) to
secure the antenna to the fixing bracket.
⿟ Screw torque: 0.59 N•m to 0.69 N•m {6 kgf•cm to
7 kgf•cm}
C
Close the screw cover.
memo
Important
⿟ Make sure that the mounting screws on the antenna are tightened
securely to keep the product from falling.
Not doing so may cause the antenna to fall.
memo
Important
⿟ Use a tool such as a torque screwdriver to tighten the screws to the
specified torque.
⿟ Use a magnetic screwdriver.
6
Checking the installation
After completing the installation, check that all components are securely fixed.
Check that there are no loose parts.
Antenna mounting screw
(M3×8 mm) (included)
Screw cover