Panasonic WX-CC412BP Скачать руководство пользователя страница 24

Страница: 24 / 52

Setting the Center Module

Do not re-register the same Wireless Repeater to one
Center Module.

ID registration will fail if you try to register an already
registered Wireless Repeater to the same lane.

When using WX-CC412BP, you can register an
already registered Wireless Repeater to a different
lane; however, it can then only be used in the
lane where it is newly registered. The previous
ID registration of the Wireless Repeater must be
deleted.

Note

How to delete an ID

Cancel registration of Wireless Repeaters.

Disconnect the USB power adaptor of the
Wireless Repeater for which you want to delete
the ID.

On the Settings screen, touch the [Wireless
Repeater] button, ([Lane A/B] button,)* and
then the [ID Deletion] button.

* This appears only when the WX-CC412BP is used.

All of the Wireless Repeater with registered IDs are
displayed in a list.

On the ID Deletion screen, touch the [Deletion]
button of the Wireless Repeater to be deleted.

The following confirmation pop-up screen is
displayed. To continue ID deletion, touch the [YES]
button. To stop ID deletion, touch the [NO] button.

Touch the [YES] button, and the registration of the
Wireless Repeater is deleted.

If the Wireless Repeater has not yet been registered,
you will not be able to touch the [ID Deletion] button.

Note

Содержание WX-CC412BP





















































Результаты поиска

Содержание WX-CC412BP

Отзывы:

Похожие инструкции для WX-CC412BP

Бренды по названию

Популярные бренды

Panasonic WX-CC412BP, Руководство по эксплуатации

Результаты поиска

Содержание WX-CC412BP

Отзывы:

Похожие инструкции для WX-CC412BP

Бренды по названию

Популярные бренды