manualshive.com logo in svg

Panasonic WX-CC411BP, Руководство по эксплуатации

Поделиться
Скачать
Panasonic WX-CC411BP Скачать руководство пользователя страница 6

6

Before use

p

w

Preface

The WX-CC411BP and WX-CC412BP are Center Modules for the wireless intercom systems that are used in drive-thru outlets.

p

w

Features

p

p

The WX-CC411BP is designed for single lane operation of drive-thru outlets; the WX-CC412BP is designed for dual lane and 
tandem lane operation.

p

p

A system compliant with the 1.9 GHz band DECT

*

 standard is used so the voices of the store personnel and customers are 

heard clearly and distinctly even in open areas, and interference is minimal, resulting in stable communication. 
* Digital Enhanced Cordless Telecommunications

p

p

Coverage area can be extended even further by installing a Wireless Repeater (WX-CR480P).

p

p

By extending the audio frequency characteristics up to 7 kHz, conversations between All-In-One Headsets and with 
customers at the order posts can be made with a higher audio quality, making it easier to hear.

p

p

A high degree of vocal clarity is ensured by a powerful echo canceller and digital noise reduction (DNR).

p

p

The cabinet supports wall-mounting for easy installation.

p

p

The total number of All-In-One Headsets and Belt Packs that can be registered is 32. Up to four operators can communicate 
at the same time per lane using All-In-One Headsets and Belt Packs.

p

p

This unit has a 7-Type LCD display with a touch panel, and is easy to operate.

p

p

This unit can be connected to an IP network using Ethernet to enable remote control operations to be performed.

p

p

Using an SD card, it is possible to back up and restore the settings, and save messages unique to the outlet.

p

p

The system contains a scheduler to enable the greeter message to be changed at designated times and reminder messages 
to be played back automatically.

p

p

Up to four Network Cameras made by i-PRO can be registered, and their images can be monitored on this unit’s LCD display.

p

p

Alert signals that have been received can be sent to the All-In-One Headsets or Belt Packs, signals can be output to external 
devices, and alert emails can be sent to external destinations.

p

w

System diagram

By connecting the Center Module and All-In-One Headsets or Belt Packs wirelessly, it is possible to communicate between the 
All-In-One Headsets or Belt Packs or between the All-In-One Headsets or Belt Packs and the customers at the order post.

WX-CR

480

STATUS

ID RE

G

All-In-One Headset

WX-CH450

WX-CH455

WX-CH457P

Belt Pack

WX-CT420

Center Module

WX-CC411BP/WX-CC412BP

All-In-One Headset

WX-CH450

WX-CH455

WX-CH457P

Vehicle detector

Order post

Microphone

WX-CM470P

WX-CS560

Speaker

WX-CS560

TALK

(Communications with

 customers)

PAGE

(Communications with 

other store personnel)

Wireless 

Repeater

WX-CR480P

p

p

Connect the vehicle 
detector to terminals 
CNT1 and COM of vehicle 
detector input [VDET]. 
If the vehicle detector is 
connected to terminal 
CNT2, it will not work, 
since this terminal is for 
expansion (unused).

Note

WX-CC411BP_PUQX1028ZAV1_IG.indb   6

2022/03/07   11:26:29

Содержание WX-CC411BP



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды