manualshive.com logo in svg

Panasonic WX-CC411BP, Руководство по эксплуатации

Поделиться
Скачать
Panasonic WX-CC411BP Скачать руководство пользователя страница 10

10

Before use

p

w

Concerning the audio frequency characteristics

This unit supports audio frequency characteristics in the range between 100 Hz and 7 kHz (Wideband).

p

p

WX-CH457P (software version 2.00 or later) is the only All-In-One Headset model that supports Wideband.

p

p

The Belt Pack (WX-CT420) and All-In-One Headsets (WX-CH450, WX-CH455, and WX-CH457P (software version earlier 
than 2.0)) do not support Wideband. When using these units, set the [Sound Band] on the Center Module to “Narrowband”.

p

p

WX-CM470P is the only order post microphone model that supports Wideband.  
Microphone WX-CS560 does not support Wideband. WX-CS560 can be used with a Center Module with the [Sound Band] 
set to “Wideband”, but the frequency characteristics will be narrower.

p

p

The following table shows the relationship between the [Sound Band] on the Center Module and whether an All-In-One 
Headset or Belt Pack can be used.

Model No.

Sound Band

WX-CH457P
(software version 
2.0 or later)

WX-CH457P
(software version 
earlier than 2.0)

WX-CH455

WX-CH450

WX-CT420

Wideband

Narrowband

   : Audio quality will be 100 Hz to 7 kHz (Wideband).
   : Audio quality will be 300 Hz to 3 kHz (Narrowband).
    :  Not available. (When the power is turned on, an “Out of range” message is heard.)

p

w

Concerning the Operating Instructions

The Operating Instructions consist of the Operating Instructions <Installation Guide>, Operating Instructions <Setup 
Instructions> (PDF file) and Operating Instructions <Browser Guide> (PDF file).

p

p

Operating Instructions <Installation Guide> (this manual): 
These instructions describe how to connect the Center Module with the required devices, how to install them and how to 
perform settings (excerpted).

p

p

Operating Instructions <Setup Instructions> (PDF file): 
These instructions describe the settings that must be performed before this unit can be used.

p

p

Operating Instructions <Browser Guide> (PDF file): 
These instructions explain access from the browser.

To read PDF files, you will need Adobe

®

 Reader

®

 which is available from Adobe Systems. When Adobe

®

 Reader

®

 is not installed 

on the PC, download the latest Adobe

®

 Reader

®

 from the Adobe web site and install it.

p

p

Download the “Operating Instructions <Setup Instructions/Browser Guide>” from the home page given below. 
https://na.panasonic.com/us/food-service-systems/clearconnecttm-restaurant-technology/

Important

p

w

Standard accessories

Power cord 

 .....................................................................

1 pc.

Wall mounting bracket 

 ...................................................

1 pc.

Power cord clamp 

 ..........................................................

1 pc.

Clamp (for securing the power cord to the wall) 

 ............

1 pc.

Operating Instructions (this manual) 

 ..............................

1 pc.

Warranty Card 

 ...............................................................

1 pc.

p

w

Trademarks and registered trademarks

p

p

Adobe, Acrobat Reader, and Adobe Reader are either registered trademarks or trademarks of Adobe in the United States 
and/or other countries.

p

p

SD, SDHC Logo is a trademark of SD-3C, LLC.

p

p

Other names of companies and products contained in these operating instructions may be trademarks or registered 
trademarks of their respective owners.

WX-CC411BP_PUQX1028ZAV1_IG.indb   10

2022/03/07   11:26:31

Содержание WX-CC411BP



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды