background image

-37-

Camera Setting

To Display the Camera Setting Menu

Move the cursor to CAMERA 

O

, and press the CAM

(SET) key. The camera setting menu appears.

Camera Identification (CAMERA ID)

You can use the camera identification to assign a name
to the camera. The camera ID consists of up to 16
alphanumeric characters. You can select whether to
have the camera ID displayed on the monitor screen or
not.

The factory default setting is OFF.

ON:

Camera ID appears on the monitor screen.

OFF:

Camera ID does not appear.

Press the CAM (SET) key to display the camera ID set-
ting menu.

To Enter a New Camera ID

(1) Move the cursor to the desired character using the

joystick, and press the CAM (SET) key.

(2) The selected character appears in the editing area.

(The pointer in the editing area moves to the right
automatically at this moment.) To enter a blank,
select SPACE.

(3) Repeat the above procedure until all characters

are entered.

Note:

Refer to page 32 for POSI, RET and RESET.

Light Control Setting (ALC/MANUAL)

You can select the mode for adjusting the lens iris.
There are two modes as follows:

ALC:

The lens iris is automatically adjusted to suit the

brightness of the object.
You can select one of two modes (BLC ON or BLC
OFF) of backlight compensation.
Backlight compensation is available in the ALC
mode. It eliminates strong background light which
makes the camera picture dark such as a spotlight.

MANUAL:

The lens iris is fixed at the value that you

have set regardless of the brightness of an object.

1. Display the SET UP menu on the monitor screen by

referring to page 29.

2. The factory default setting is ALC.

When you select ALC, set backlight compensation.

Note:

The backlight compensation submenu asso-

ciated with this menu is described separately
and should be set up after installing the cam-
era at the site and observing the actual site
picture.

3. When MANUAL is selected, quit the setup menu by

pressing the MON (ESC) key. Press the OPEN or
CLOSE key on the controller for iris adjustment.

   ** SET UP MENU **
PRESET  1 

O

 

 MAP 

O

 

 HOME POSITION OFF
 SELF RETURN   OFF
 AUTO MODE     OFF
 FLIP-A-CHIP   ON
 CLEANING      OFF
 IMAGE HOLD    OFF
 
 CAMERA 

O

 NETWORK 

O

      ** SET UP **
CAMERA ID    ON 

O

ALC/MANUAL   ALC 

O

SHUTTER      OFF
AGC          ON(MID)
SYNC         INT
WHITE BAL    ATW 

O

AF MODE      MANUAL
EL-ZOOM      ON
SENS UP      OFF
MOTION DET   OFF
RET     SPECIAL 

O

   

      ** SET UP **
CAMERA ID    ON 

O

ALC/MANUAL   ALC 

O

SHUTTER      OFF
AGC          ON(MID)
SYNC         INT
WHITE BAL    ATW 

O

AF MODE      MANUAL
EL-ZOOM      ON
SENS UP      OFF
MOTION DET   OFF
RET     SPECIAL 

O

     CAMERA ID --
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,'":;&#!?=
     +-*/%$

    SPACE
    ----  POSI RET RESET

    ................
    

      ** SET UP **
CAMERA ID    ON 

O

ALC/MANUAL   ALC 

O

SHUTTER      OFF
AGC          ON(MID)
SYNC         INT
WHITE BAL    ATW 

O

AF MODE      MANUAL
EL-ZOOM      ON
SENS UP      OFF
MOTION DET   OFF
RET     SPECIAL 

O

Содержание WVNS324 - NETWRK CLR DOME CAME

































































Отзывы: