Installing PTZ Cameras on a DVX system
June 2002
4
Page
1
2
3
4
OFF
ON
ON
ON
1
2
3
4
ON
ON
ON
ON
Panasonic WV-CS854: Camera Termination
The figure on page 2 shows the location of the SW2 switch, which is used to select the termination (switch 1) and duplex
setting (switches 2–4, half duplex). Complete the following instructions:
1.
Remove the camera from its mount.
2.
Set SW2 as follows if the camera is not the final camera in a chain:
3.
Set SW2 as follows if the camera is the final camera in a chain:
See the Panasonic WV-CS854 installation manual for more information.
Panasonic WV-CS854: Connecting Multiple Cameras
Additional cameras are connected to the DVX system in a daisy chain, star, or combination configuration; the final camera in
each chain must be terminated. Each camera must have a unique address that matches the video input number it is connected
to on the DVX system (see the DVX user manual). Sample configurations are shown in the following figure.
See the camera manufacturer’s installation manual for more information.
D V X
A d d res s : 1
A d d res s : 2
A d d res s : 3
(te rm in at e)
D A IS Y C H A IN
D V X
A d d res s : 1
A d d res s : 2
A d d res s : 3
(te rm in at e)
(te rm in at e)
(te rm in at e)
S T A R
D V X
A d d res s : 1
A d d res s : 3
A d d res s : 5
A d d res s : 2
(te rm in at e)
A d d res s : 4
(te rm in at e)
A d d res s : 6
(te rm in at e)
C O M B IN A T IO N