17
Notes:
• The adjustment procedure for general varifocal lenses is described as follows: For further
information, refer to the operating instructions for the lens to be used.
1. Display a subject that exists as far as possible (10 m or more recommended) to adjust
the back focus.
2. For 8-, or 10-fold magnification lenses, adjust the back focus after setting the zoom to
the WIDE end and setting the focus to the FAR end.
For 2-, or 3-fold magnification lenses, adjust the back focus after setting the zoom to
the TELE end and setting the focus to the FAR end.
3. Adjust the view angle and focus coarsely by adjusting the zoom and focus of the lens
to center a photographic subject in the screen, and then perform the main adjustment
of the back focus (
☞
pages 17 and 45).
• When a non-Panasonic lens that has an extended range for lens focusing is used, adjust
the back focus after setting the focus to a position at a short distance from the FAR end in
Step 2 described above. If adjustment is performed in the extended range, appropriate
adjustment cannot be obtained.
How to use fixed focus lens
• For a fixed focus lens with focus adjustment, adjust the back focus after setting the focus of
the lens to the FAR end.
.
Adjusts the back focus.
Use the operation buttons (
☞
page 9) for this operation.
The back focus is also adjustable in the Setup menu. Refer to page 45 for how to operate
and detailed explanation.
q
Press the setting button after adjusting the view angle while viewing the video monitor.
w
The focus position is displayed in the
lower part of the screen, and the back
focus is automatically adjusted.
e
To perform fine adjustment of the back
focus after automatic back focus adjust-
ment, use the right or left button.
Notes:
• No operation for more than 10 seconds automatically clears the focus position.
• Pressing the right and left buttons simultaneously resets the back focus position to the CS
mount default position.
NEAR
FAR
.........
|
..........
INDICATOR XXXX
