10
The screws and bolts must be tightened to
the specified torque.
Failure to observe this may cause a drop
resulting in injury or accidents.
Turn the power off when do wiring of this
product.
Failure to observe this may cause electric
shock. In addition, short circuit or wrong wiring
may cause fire.
Install this product in a location high
enough to avoid people and objects from
bumping the product.
Failure to observe this may cause injury.
The measures of protection against a fall
of this product shall be taken.
Failure to observe this may cause a drop
resulting in injury or accidents.
Be sure to install the safety wire.
Do not install this product in locations
subject to vibration.
Loosening of mounting screws or bolts may
cause a fall of the product resulting in injury or
accidents.
Correctly perform all wiring
Short circuits in the wiring or incorrect wiring
may cause fire or electrical shock.
The measures of protection against snow-
fall shall be taken.
Weight of snow may cause a fall of the product
resulting in injury or accidents.
Protect the product against snowfall by install-
ing it under eaves.
Turn the power off when cleaning this
product.
X
8570
Failure to observe this may cause electrical
shock.
Turn the power off when cleaning this
product.
S
8530
Failure to observe this may cause injury.
Install the product securely on a ceiling or
wall in accordance with the installation
instructions.
Failure to observe this may cause injury or
accidents.
Do not rub the edges of metal parts with
your hand.
Failure to observe this may cause injury.
[Precautions for use]
When the product is accessible from the
Internet
To prevent unauthorized access, note the
following.
• Leave user authentication turned on.
•
Periodically change passwords that are
used to access the product.
Refer to the Operating Instructions on the
Panasonic support web site for information
about how to change passwords.
To keep on using with stable performance
Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product. Do not expose this
product to direct heat sources such as a heater.
This product has no power switch.
When turning off the power, disconnect the
power supply from the the PoE device.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. Failure to observe this
may cause trouble.
About the battery
A battery is installed inside the camera. Do not
leave the battery exposed in environments of
excessive heat as a result of sunlight or fire.
Do not subject dome cover to strong
impact.
Doing so may cause damage or immersion.
Do not touch the dome cover with your
bare hands.
A dirty dome cover causes deterioration of pic-
ture quality.
When an error is detected, this product
will restart automatically.
This product will be inoperable for around 2
minutes after the restart just as when the
power is turned on.
