8
{
1
}
RJ45 Network terminal
Connect an Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the network terminal.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
•
X4173
S4151
When connecting both the 12 V DC power supply and the PoE device
for power supply, 12 V DC will be used for power supply.
•
When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
{
2
}
X4173
S4151
Power supply terminal (12 V DC)
Connect the output cable of the AC adaptor to the power supply terminal (accessory) and attach it
to the camera.
IMPORTANT:
• Be sure to use the power cable plug (accessory) provided with this product.
• Be sure to fully insert the power cable plug (accessory) into the power supply terminal (12 V
DC). Otherwise, it may damage the camera or cause malfunction.
• When installing the camera, make sure that excessive force is not applied to the power cable.
• Be sure to use an AC adaptor compliant with the Specifications (written in the indication label
on the bottom side of this unit) regarding power source and power consumption.
Parts and functions
Terminals
{
1
}
RJ45 Network terminal
{
2
}
X4173
S4151
Power supply
terminal (12 V DC)
{
3
}
X4173
S4151
Audio input cable
{
4
}
X4173
S4151
Audio output cable
{
5
}
X4173
S4151
EXT I/O terminals/
EXT I/O terminal plug
X4173
S4151
Audio cable (accessory)
【
2
】
【
1
】
【
5
】
X4173
S4151
Audio cable connector
【
3
】
【
4
】
