Specifications
• Basic
Power source:
24 V AC or PoE+ (IEEE802.3at compliant)
Power consumption:
SW396A
SW396
24 V AC*: 50 Hz/60 Hz: 43 W/1.8 A, PoE+: Approx. 25 W/460 mA
(Class 4 device)
SW395A
SW395
24 V AC*: 50 Hz/60 Hz: 43 W/1.8 A, PoE+: Approx. 24 W/440 mA
(Class 4 device)
*
ONLY CONNECT 24 V AC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or
LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).
Ambient operating temperature:
SW396A
SW396
–50 °C to +55 °C {–58 °F to +131 °F} (24 V AC)
*1*2
–30 °C to +55 °C {–22 °F to +131 °F} (PoE+)
SW395A
SW395
–40 °C to +50 °C {–40 °F to +122 °F} (24 V AC)
*1
–30 °C to +50 °C {–22 °F to +122 °F} (PoE+)
Ambient operating humidity:
Less than 90 % (no condensation)
Monitor output (for adjustment):
VBS: 1.0 V [p-p]/75
Ω
, composite (BNC)
External I/O terminals:
ALARM IN 1/ DAY/NIGHT IN/ ALARM IN 2/ ALARM OUT/ ALARM IN 3/ AUX OUT (x1 each)
Microphone/line input:
ø3.5 mm monaural mini jack
Input impedance: Approx. 2 k
Ω
(unbalanced)
For microphone input:
Applicable microphone: Plug-in power type
Supply voltage: 2.5 V ±0.5 V
For line input:
Input level: Approx. –10 dBV
Audio output:
ø3.5 mm stereo mini jack (monaural output)
• Output impedance:
Approx. 600
Ω
(unbalanced)
• Recommended cable length: 10 m {32.8 feet} or less
• Output level:
–20 dBV
Water resistance:
Camera: IP66 (IEC60529)
Type 4 (UL50), NEMA 4 compliant
SW396A
SW396
*
Only when installation work specified in this book is properly performed and
appropriate waterproof treatment is performed
Heater unit:
Turns on automatically when the inside temperature drops below 10 °C {50 °F}.
Dimensions:
SW396A
SW396
ø229 mm x 344 (H) mm {ø9-1/32 inches x 13-9/16 inches (H)},
diameter of the dome: 150 mm {5-29/32 inches}
SW395A
SW395
ø229 mm x 325 (H) mm {ø9-1/32 inches x 12-25/32 inches (H)},
diameter of the dome: 150 mm {5-29/32 inches}
Mass:
Main body:
Approx. 4.6 k
g
{10.15 lbs}
Finish: Main
body:
Aluminum die cast with glazed melamine coating (Coating color: Natural silver)
Sunshields*
3
: ASA resin coating (Coating color: Natural silver)
Dome cover: Clear polycarbonate resin (Rain wash coating
SW396A
SW395A
)
*1 When using this product without turning the power off. (However, the temperature inside the camera shall be –10 °C
{14 °F} or higher.) Perform settings or startup operations when the ambient temperature is –30 °C {–22 °F} or higher.
*2 When using this product at temperatures of –40 °C {–40 °F} or below, use the power supply between 24 V AC and 27 V AC.
*3 It is impossible to remove the main sunshield.
35
