![background image](http://html1.mh-extra.com/html/panasonic/wv-sw355pj/wv-sw355pj_installation-manual_4171224028.webp)
28
v
Connect a LAN cable (category 5e or better, straight, STP*) to the network connector.
* PAL model only
b
Connect the power cable.
• When using 12 V DC power supply*
1
Connect the output cable of the AC adaptor to the 2P power cable.
• When using PoE (IEEE802.3af compliant)
Connect a LAN cable (category 5 or better, straight, STP*
2
) between a PoE device (such as a
hub) and the network connector of the camera.
*1 FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY.
*2 PAL model only
Important:
• Use all 4 pairs (8 pins) of the LAN cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply, PoE
will be used for power supply.
• When the LAN cable is disconnected once, reconnect the cable after about 2 seconds. When
the cable is quickly reconnected, the power may not be supplied from the PoE device.
Содержание WV-SW355PJ
Страница 50: ...50 ...