Panasonic WV-SW316L, Руководство по установке

Страница: 34 / 50

34
Attaching the mounting surface on the top surface of the camera body
When the mounting surface is changed to the top surface of the camera body
z
Remove the 4 sunshield fixing screws from the camera body and remove the sunshield.
x
Remove the 4 tripod head fixing screws from the camera body and remove the tripod head.
c
Loosen the fixing screw x1 and remove the rear cover, and remove the cap.
v
Rotate each cable in the direction of the arrow (clockwise) as illustrated and pass them between
opening in the upper groove of the main body.
Then, attach the cap to the lower groove, and secure the rear cover with the fixing screw x1.
Attach the rear cover to the front cover by hooking attachment hole 1 of the rear cover to the tab on the
front cover while passing the protrusion of the front cover through attachment hole 2 of the rear cover.
Upper groove
Tab Protrusion
Cap
Attachment hole 1
Attachment
hole 2
Tripod head fixing screw x4
Tripod head
(This illustration represents WV-SW316.)
(This illustration represents WV-SW316.)
Rear cover Fixing screw x1