33
<WV-SW316L/WV-SW316>
Mount the front cover.
<WV-SW314>
Attach the desiccant (accessory) to the inner bottom side of the front cover along the guide rib, and
mount the front cover.
Desiccant (accessory)
Guide rib
Fixing screw x4
(3)
(1)
(2)
(4)
IMPORTANT:
• Be sure to attach the desiccant (accessory). Refer to the instructions for the desiccant for how
to attach it.
SW314
• The tightening torque described below shall be followed for the 4 fixing screws of front cover.
Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}
• The tightening sequence of the 4 fixing screws of the front cover shall be observed and repeat
-
ed twice as described in the illustration above.
((1)
→
(2)
→
(3)
→
(4), twice)
• Make sure the packing has not come off or become askew. If this happens put it back into
place.
• Make sure the packing has no dust or other contaminants on it. Remove any dust or contami
-
nants on the packing.
•
Remove the cover film from the clear part of the front cover section after the installation is complete.
Do not touch the clear part of the front cover section by hand directly after removing the cover film.
Mounting the front cover
Fixing screw x4
(3)
(1)
(2)
(4)
Содержание WV-SW316L
Страница 49: ...49 ...