13
• When using an SD memory card, format it
using this product. Recorded data on the
SD memory card will be deleted when for-
matted. If an unformatted SD memory card
or an SD memory card formatted with
other devices is used, this product may
not work properly or performance deterio-
ration may be caused. Refer to the
operating instructions on the provided
CD-ROM for how to format an SD memory
card.
• When some SD memory cards are used
with this product, the product may not
work properly or performance deterioration
may be caused. Use the compatible SD
memory cards in page 26.
• When using an SD memory card
supporting Class 10 of the speed class,
use a UHS-I (Ultra High Speed-I) compliant
card.
We shall not be liable for content
compensation, losses of recorded or
edited content and any direct or indirect
consequent damages caused by failure to
record or edit due to faults with this unit or
the SD memory card. In addition, the same
provisions apply after unit is reparied.
SFV311
SFV310
About the dehumidifying device
• This product has dehumidifying device to
keep the inside at low moisture level, pre-
venting condensation and quickly dissipat-
ing dew if produced.
• Dew may be produced depending on the
conditions of temperature, humidity, winds,
and rain, and it may take time to dehumidify.
• The dehumidifying device is mounted inside
the enclosure. In order to maintain normal
operation of the dehumidifier function, do
not caulk (fill the clearance with sealants or
other materials) the clearance between the
enclosure and the ceiling or wall.
Dehumidifying
device
SFV311
SFV310
What to do if “WARMING UP-PLEASE
WAIT” appears on the display.
This message indicates that the temperature
inside the camera has become extremely low.
In such a case, wait until the heater unit of the
camera raises the internal temperature (for
around 2 hours or more in low temperatures
below –20 ºC {–4 ºF}), and turn the power off
once, then turn it back on again.
About the MOS image sensor
• When continuously shooting a bright light
source such as a spotlight, the color filter
of the MOS image sensor may become
deteriorated and this may cause discolor-
ation. Even when changing the fixed
shooting direction after continuously
shooting a spotlight for a certain period,
the discoloration may remain.
• When shooting fast-moving subjects or
objects crossing the shooting area may
look to be bending askew.
About the built-in microphone
SFN310
• If moisture attach to the peristome of built-
in microphone, the volume may decrease.
Please leave it to air dry sufficiently before
use.
• When cleaning the peristome of built-in
microphone, do not use any sharp-ended
object to stab it. Doing so may result in
failure or submerging.
Cleaning this product body
Be sure to turn off the power before cleaning.
Failure to observe this may cause injury. Do not
use benzine, thinner, alcohol, or any other