•
SD MOUNT indicator (SD MOUNT): Lights when data can be saved to the SD memory card. It blinks
or is off when data cannot be saved to the SD memory card.
–
Indicator is off:
Indicates "Not use" is selected for SD memory card, or an error occurred for the
SD memory card set to "Use".
–
Indicator blinks:
Indicates the SD memory card is being recognized or is performing the necessary
processing for the SD memory card to be removed.
–
Indicator lights:
Indicates data can be saved to the SD memory card.
[Alarm status update mode]
Select an interval of the camera status notification from the following.
When the status of the camera changes, the alarm occurrence indication button, the [AUX] button or the SD
saving status indicator will be displayed to notify of the camera status.
•
Polling(30s):
Updates the status each 30 seconds and provide notification of the camera status.
•
Real time:
Provide notification of the camera status when the status has changed.
•
Default:
Real time
Note
•
Depending on the network environment, notification may not be provided in real time.
•
When multiple cameras are using the same “Alarm status reception port”, even if “Real time” is selected
for “Alarm status update mode”, status notification is not provided in real time. In this case, change the
“Alarm status reception port” settings.
[Alarm status reception port]
When selecting “Real time” for “Alarm status update mode”, designate a port number to which the status change
notification is to be sent.
•
Available port number:
1 - 65535
•
Default:
31004
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Viewer software (nwcv4Ssetup.exe)] - [Automatic installation]
Determine whether or not to install the viewer software from this camera.
•
On:
Installs the viewer software from the camera automatically.
•
Off:
The viewer software cannot be installed from the camera.
•
Default:
On
[Viewer software (nwcv4Ssetup.exe)] - [Smoother live video display on the browser
(buffering)]
Perform settings to display camera images on the viewer software.
•
On:
Images are temporarily stored on the computer and are displayed smoother.
•
Off:
Images are displayed in real-time and are not stored on the computer.
•
Default:
On
IMPORTANT
•
It is impossible to display images and to receive/transmit audio between the camera and the PC when
the viewer software “Network Camera View 4S” is not installed on the PC.
•
The number of the viewer software installations can be checked on the [Upgrade] tab of the
“Maintenance” page.
[Monitor out]
Select the video format outputted from the MONITOR OUT terminal to the adjustment monitor.
Switch priority/NTSC/PAL
Default:
Switch priority
Operating Instructions
49
10 Configure the basic settings of the camera [Basic]
