5
4
．
Add a note when the bit rate of the recording stream is set to a value
(Operating Instructions “Image/Audio” - Configure the settings relating to Stream
[Image]
Add the statement that it is possible that an error may occur in the continuity of SD memory card
recording, if you set a bit rate that exceeds the recommended value in “Note
”
of “Max bit rate (per
client) *
”
.
[Max bit rate (per client)*]:
Note
• The bit rate for “Stream” is restricted by “Bandwidth control (bit rate)” on the [Network] tab on the
“Network” page. When a value with “*” attached is set, images may not be streamed.
• It is recommend that the bit rate setting of the stream to be 8192 kbps or lower. Setting a value higher
than 8192 kbps may cause abnormalities in the continuity of the recorded video.
• When the refresh interval is too short, the actual bit rate may exceed the set bit rate depending on the
subject.
• Depending on the number users connecting at the same time or the combination of features used, the
bit rate may be lower than the configured value. Check the transmission of images after changing
settings.
