20
•
Available number of characters:
1 - 256 characters
•
Unavailable characters:
" & ;
[File name]
Enter the file name used for the alarm image to be transmitted to an SFTP server. The file name will be
as follows.
File name: [“Entered file name” + “Time and date (year/ month/ day/ hour/ minute/ second)”] + “Serial
number”
•
Available number of characters:
1 - 32 characters
•
Unavailable characters:
" & * / : ; < > ? ¥ |
•
Terminal 1:
Transmit the image to the SFTP server when an alarm occurs in Terminal 1.
•
Terminal 2:
Transmit the image to the SFTP server when an alarm occurs in Terminal 2.
•
Terminal 3:
Transmit the image to the SFTP server when an alarm occurs in Terminal 3.
•
VMD:
Transmit the image to the SFTP server when motion is detected.
•
Command alarm:
Transmit the image to the SFTP server when a command alarm is entered.
[Pre alarm]
•
Transmission interval
Select the update interval of images before an alarm occurs from the following.
When “Frame rate mode” is set to 30fps mode: 0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
When “Frame rate mode” is set to 25fps mode: 0.08fps/ 0.17fps/ 0.28fps/ 0.42fps/ 1fps
•
Default:
1fps
•
Maximum number of images
Select the number of images to be transmitted from the following.
0pics/ 1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics*/ 7pics*/ 8pics*/ 9pics*/ 10pics*/ 20pics*/ 30pics*/ 40pics*/
50pics*
•
Default:
0 pics
•
Recording duration
The recording duration, which changes according to the configured “Transmission interval” and
“Maximum number of images”, of images recorded before an alarm occurs is displayed.
Note
• When “JPEG(1)” is selected for the capture size of the image to be transmitted, pre alarm is
unavailable if the image capture size of “JPEG(1)” is either “2992x2992“, “2560x1920“, “2560x1440“,
“2048x1536“, “2192x2192“, “1920x1080“ or “1600x1200“.
• When “On” is selected for “Image compression rate upon alarm detection”, only post alarm recorded
images are compressed. Compression is not applied to pre alarm recorded images.
• When a selection with an asterisk (*) on the right of it is selected for “Maximum number of images” of
“Pre alarm”, the specified number of images may not be able to be sent depending on the image capture
size and image quality. The following table shows the maximum number of images that can be sent
for pre alarm.
