![background image](http://html.mh-extra.com/html/panasonic/wv-nw484s-i-pro-network-camera/wv-nw484s-i-pro-network-camera_setup-manual_277931071.webp)
71
Cannot access from
the browser.
▲
• Is the same IP address assigned to other
devices?
• Are there contradictions between the address
and the network subnet to be accessed?
• [When the camera and the PC are connected in
the same subnet]
Are the IP addresses of the camera and the PC
set in a common subnet?
• Or is "Use Proxy Server" for the settings of the
browser checked?
When accessing the camera in the same subnet, we
recommend entering the address of the camera in the
"Don't Use Proxy For These Addresses" box.
When the camera and the PC are connected in different
subnets, check if the IP address of the default gateway set
for the camera is correct.
—
▲
• Is the camera turned on?
Check if the AC/DC power supply or PoE power supply is
correctly connected.
Operating
Instructions
Cannot obtain images
on the SD memory
card.
▲
• Is "Allow" selected for "FTP access" on the
"Network setup" page?
If not, select "Allow".
52
No image is displayed.
▲
• If the viewer software installed on the PC?
Install the viewer software on the PC.
Operating
Instructions
▲
• Is the version of DirectX
®
9.0c or later?
Check the version of DirectX
®
as follows:
1. Select [Run...] from the Start menu on the PC.
2. Enter "dxdiag" in the displayed dialog box and click the
[OK] button.
If the version of DirectX is older than 9.0c, obtain the
latest version of DirectX
®
from Microsoft's web site.
—
Symptom
Cause/solution
Reference
pages