-16-
7. Click the "Use the following IP address" radio but-
ton and enter the IP address and the subnet mask
as follows.
"IP address"
: 192.168.0.9
"Subnet mask"
: 255.255.255.0
8. Click the [OK] button, and the window closes.
Note:
When a blue picture appears instead of the
live picture due to Internet traffic congestion,
downsize the window.
■
Network Setup of the Camera
On completion of the network setup of the PC, begin
the network setup of the camera. If two or more cam-
eras are connected, each camera needs to be set up
individually. The following information is necessary for
the network setup of the camera. If you do not have this
information, contact your network administrator or
Internet service provider.
• IP address
• Subnet mask
• Default gateway (when using a gateway server or a
router)
• Port number
• DNS server address 1 and/or 2 (when using DNS)
1. Start up Internet Explorer on your PC.
2. Enter "http://192.168.0.10" (the default IP address
of the camera) in the address bar. The main page
of the camera appears.