![background image](http://html.mh-extra.com/html/panasonic/wv-np502/wv-np502_operating-instructions-manual_277922091.webp)
Note
•
When audio is transmitted from the camera, the port number to be used will be the multicast port number
plus “1000”.
[Multicast TTL/HOPLimit]
*2
Enter the multicast TTL/HOPLimit value.
•
Available value:
1 - 254
•
Default:
16
IMPORTANT
•
When transmitting an MPEG-4 image via a network, the transmitted image sometimes may not be
displayed depending on the settings of a proxy server or a firewall. In this case, refer to the network
administrator.
•
When two or more network interface cards are installed on the PC in use, the network interface
card(s) not used for receiving images should be invalidated when displaying images using the multicast
port.
[Smoother live video display on the browser (buffering)]
Perform settings to display camera images on the viewer software.
•
On:
Images are temporarily stored on the computer and are displayed smoother.
•
Off:
Images are displayed in real-time and are not stored on the computer.
•
Default:
On
IMPORTANT
•
If it appears that there is a delay in the images being displayed, select “Off”.
*1
It is necessary to designate the unicast port number when “Unicast port (MANUAL)” is selected for “Transmission type”.
*2
It is necessary to designate the multicast IP address when “Multicast” is selected for “Transmission type”.
Operating Instructions
91
11 Configure the settings relating to images and audio [Image/Audio]