33
** PASSWORD? **
0 1 2 3 4 5 6 7 8 9
. . .
↑
OK RESET
NEW PASSWORD
RET
PASSWORD
** SPECIAL 1 **
PRIVACY ZONE OFF(ENB)
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
PASSWORD LOCK ON
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD OFF
RET
Special 1 menu
COAXIAL ALARM OUT
Alarm output signals are supplied through the coaxial cable.
1. Move the cursor to COAX ALM OUT and select ON or OFF.
2. Press the CAM (SET) key.
The factory default setting is OFF.
ON:
The camera sends an alarm output signal after it turns to a preset position.
OFF:
The camera does not send the output signal.
Notes:
• The camera ignores alarm inputs during manual operation.
• Select OFF when the camera downloads or uploads the preset data.
●
Password Lock (PASSWORD LOCK)
Caution:
For security do not operate your VTR for recording while the
password menus are displayed on the monitor screen.
A 3-digit number is used for a password to limit access to the privacy
zone settings.
1. Move the cursor to PASSWORD LOCK, then select ON or OFF by
moving the joystick to the right or left.
The factory default setting is OFF.
Note:
ON or OFF can be selected only after going through the
password verification.
OFF:
Access to the privacy zone settings is free. ON(ENB) or
OFF(ENB) for PRIVACY ZONE appears on the SPECIAL 1
menu.
ON:
Access is limited in the verification menu. ON(DIS) or
OFF(DIS) for PRIVACY ZONE appears on the SPECIAL 1
menu.
2. Press the CAM (SET) key.
Password Verification
3. The password verification menu appears.
3-1 Select a numeral for the first digit by moving the joystick to
the right or left, and press the CAM (SET) key. Though the
entered password is not displayed, the up-arrow moves one
character to the right.
3-2 Repeat the above step for the 2nd and 3rd digits.
Default: 123
3-3 The cursor moves to OK after all the three digits have been
entered. Unless you want to change the password, press the
CAM (SET) key.
If the password entered is entered, the screen returns to SPE-
CIAL 1. ON and OFF settings are the same as made on the
SPECIAL 1 menu is as set in step 1.
If a wrong password is entered, the screen returns to the veri-
fication menu. Repeat steps 3-1 to 3-3 to verify the password.
3-4 To cancel an incomplete password,. move the cursor to
RESET, and press the CAM (SET) key. The screen returns to
the verification menu.
