8
Power source
The input power source for this product is 120 V - 240 V AC
50 Hz/ 60 Hz.
Do not connect to an outlet that provides the power to
equipment that requires a measurable amount of power
(such as a copy machine, air conditioner, etc.). Avoid placing
this product in locations subject to water contact.
* The provided power cord(s) is (are) dedicated to use with
this product. Do not use with any other device. Also, do
not use any other power cord with this product.
To cut the power supply
This product has no power switch. To cut the power supply,
unplug the power plug of the product from the AC outlet.
Install the AC outlet near this product to make it easy to plug
in and unplug the power cord. If the power cord cannot be
unplugged easily due to installation conditions, connect the
power cord to an AC outlet via a distribution board circuit
breaker with a cut-off capacity.
Ambient operating temperature
Use this product at temperatures between 0 °C to 50 °C
{41 °F to 113 °F}. Failure to do so may damage the internal
parts or cause malfunction.
Prevent condensation from forming
If this happens, it can cause malfunction.
Leave it switched off for around 2 hours in the following
cases.
• When this product is placed in an extremely humid
place.
• When this product is placed in a room where a heater
has just been turned on.
• When this product is moved from an air-conditioned
room to a humid and high-temperature room.
Cleaning
• Turn the power off, and then use a soft cloth to clean
this product.
• Do not use strong or abrasive detergents when cleaning
the body.
• When using a chemical cloth for cleaning, read the
precautions provided with the chemical cloth product.
Indication label
Refer to the indication label placed on the bottom of this
product for the equipment classification and power source,
etc.
Precautions for use
Precautions
(continued)
