36
Main unit settings
(continued)
6
Move the cursor to the right using the
This is the screen for selecting “Enable: E / Disable: D”.
The display returns to the selection screen when
or
is pressed.
7
Press
or
and select Enable (E) /
Disable (D)
8
Press
The settings confirmation screen is displayed.
9
Press
The settings registration screen is displayed for a few
seconds.
After that, the set value is stored, and the screen returns to
that of Step 2.
Repeat Step 2 to Step 9 when changing the restrictions of
several functions.
When the logged-in user is not an administrator, before the
function level settings screen is displayed (Step 2), it is
necessary to input the administrator ID and password in that
sequence.
For details of the method of inputting, refer to “Method of
Using the Settings Menus” (
☞
It is possible to confirm the user ID and password of the registered operators.
Operation procedure
1
From the settings menu, select “008 Operator
Check” (
☞
2
Press
The operator settings (user ID and password) confirmation
screen is displayed.
3
Press
or
, and select the number of the
operator whose settings are to be checked
Every time
or
is pressed, the operator number
changes successively from Operator 01 (Operator No. 1) to
Operator 16 (Operator No. 16).
When checking the settings of an operator, select an
operator number to the right of which “No Assign” is not
displayed (indicating that it is an already registered operator).
4
Press
The settings (user ID and password) display screen of the
selected operator number is displayed.
When the logged-in user is not an administrator, the
administrator ID input screen is displayed before the
operator settings (user ID and password) confirmation
screen is displayed (Step 2), and it will be necessary to input
the administrator ID and password.
For details of the method of inputting, refer to “Method of
Using the Settings Menus” (
☞
Confirming the operator settings
