Panasonic WV-CP280 Series, Руководство по эксплуатации

Страница: 12 / 114

Camera mounting
screws
Mount adapter
Screw hole
(1/4-20 UNC)
• When attaching the mount adapter
removed from the top of the camera on
to the bottom of the camera, do not use
screws other than those removed.
Otherwise, it may cause a malfunction or
the camera may fall off.
Recommended tightening torque:
0.39 N·m {4 k
g
f·cm}
Mounting place
Ceiling
Model
WV-7010A
Recommended
screw
M8
Number of
screws
3 pcs.
Minimum pullout
strength (per 1 pc.)
196 N {20 k g f}
Wall WV-831 M8 4 pcs.
921 N {94 k
g
f}
The mounting requirements are shown as follows.
12
Installations and Connections
z
Mount the lens (option) by rotating it
clockwise slowly.
x
Connect the lens cable to the ALC lens
connector of the camera.
ALC lens
connector
Flange-back
adjustment ring
Lens
(option)
c
Fix an optional camera mount bracket on to the desired place and mount the camera on it.
• Method of installation may be different depending on the material of the place where the
camera mount bracket is to be installed.
Do not use wood screws to fix the optional camera mount bracket.
• When installing on steel: Fix with bolts and nuts (M8).
• When installing on concrete: Fix with anchor bolts (M8).
Recommended tightening torque: M8: 6.2 N·m {62 k g f·cm}
Caution:
ONLY CONNECT THIS TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY.
Be sure to connect the grounding lead to the GND terminal. (WV-CP284)