![background image](http://html1.mh-extra.com/html/panasonic/wv-cl924a/wv-cl924a_operating-instructions-manual_4226135018.webp)
-19-
Left Button
Set Switch
Right Button
Down Button
Up Button
Up Button
(
)
:
Moves the cursor upwards. Use
this button to select an item or
adjust the parameters.
Down Button
(
)
: Moves the cursor downwards. Use
this button to select an item or
adjust the parameters.
Right Button
(
)
: Moves the cursor to the right. Use
this button to select or adjust the
parameters of the selected item.
The parameter changes each time
this button is pressed.
2. SETUP OPERATION
This camera utilizes a user setup menu (CAM SET UP)
that is displayed on the monitor.
To set items on the CAM SET UP menu, use the follow-
ing buttons on the side panel.
Left Button
(
)
:
Moves the cursor to the left. Use
this button to select or adjust the
parameters of the selected item.
The parameter changes each time
this button is pressed.
Set Button
(
)
:
Executes selection and displays a
submenu for an item with
mark.
END: Close Setup menu.
RET: Return to the previous menu
or page.
To return to the CAM SET UP menu move the cur-
sor to RET and press
.
• All Reset Operation
All Reset allows you to reset all setup menu items to the
factory settings if you are unsure about the correct set-
tings. Proceed as follows:
(1) Make sure that the CAM SET UP menu is not dis-
played (a camera picture is displayed).
(2) While pressing both
and
, press
for a
few seconds. The message ALL RESET momentari-
ly appears on the monitor.
This resets all adjustments and parameters to the
factory default settings.